MDS TransNET 900 Specifications download pdf (Page 47)

MDS 05-2708A01, Rev. E MDS TransNET Ref. Manual 37

All units default to Remotes; other modes must be specifically programmed

with the

MODE command.

MODE X is used, the MODE X radio should be programmed with an

Extended Address (XADDR). Units that need to hear this MODE X radio must

be programmed with an appropriate

XPRI and/or XMAP value.

MRSSI [NONE, –40...–90]

Minimum RSSI for Mobile Operation

The MRSSI command sets or displays the minimum RSSI level (dBm) of a

Master station’s signal to maintain synchronization. When the Master’s

signal falls below this level, the Remote will attempt to resynchronize with

the next Master it can hear within the same network—same Network Address

(

ADDR)—and, meets the MRSSI level. See “Mobile Operation Support” on

Page 62 for additional information.

OT [ON, OFF]

Output Trigger

The “output trigger” feature sets up a 1-second default delay on delivery of

RXD serial data, however, a receipt of RTS causes cancellation of timer

followed by immediate data delivery.

Hierarchy Rules:

•if

OT = ON, RTS always cancels data delay and outputs immediately

•if

OT = ON, DEVICE = DCE, and RXD = 0, data delay is 1 second or

until RTS

•if

DEVICE = DCE, and RXD = N, data delay is N ms

•if

DEVICE = CTS KEY, and CTS = N, data delay is N ms or until RTS

•if

DEVICE = CTS KEY overrides RXD, RXD overrides OT default.

OWM [xxxxx]

“Owner’s Message”

The OWM command sets or displays an optional owner’s message, such as the

system name. The entry can contain up to 30 characters.

OWN [xxxxx]

“Owner’s Name”

The OWN command sets or displays an optional owner’s name, such as the

site name. The entry can contain up to 30 characters.

PORT [RS232, RS485]

Data Interface Port Signaling Standard

Select or identify the current data port (DATA connector) interface signaling

mode:

RS232 or RS485. This is the port though which the payload data will

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

Comments to this Manuals

No comments

MDS TransNET 900 Specifications Page 47

Comments to this Manuals

Related products and manuals for Networking MDS TransNET 900